Sportcars Picture Website
|More Information on the Porsche 928|
The Porsche 928 is a luxury grand tourer produced by Porsche AG of Germany from 1978 to 1995. Originally intended to replace the company's iconic 911, the 928 combined the power, poise, and handling of a sports car with the refinement, comfort, and equipment of a luxury sedan. Porsche executives believed such a flagship would have wider appeal than the compact, quirky and sometimes difficult to drive 911.
The 928 has the distinction of being the company's first production V8 powered model and its only coupé powered by a front-mounted V8 engine.
By the late 1960s Porsche had firmly established itself as a manufacturer of high-performance sports cars. Executives, including owner Ferdinand Porsche, were beginning to consider adding a luxury touring car to the line-up due to the need of a car using less fuel and being more usable in the wake of the 1970s oil crisis. Managing director Ernst Fuhrmann was pressuring Ferdinand to approve development of the new model due to concerns that the then-current flagship model, the 911, was reaching the limits of its potential. Fuhrmann believed that the future of the company relied upon grand touring cars with conventional engines rather than unconventional sports cars. Slumping sales of the 911 in the mid-1970s seemed to confirm that the model was approaching the end of its economic life cycle. Fuhrmann envisioned the new range-topping grand tourer model as being the best possible combination of a sports coupé and a luxury sedan. This would set it apart from the 911, with its relatively spartan interior and true sports car performance. The targets were that the car had to compete on par with offerings from Mercedes-Benz and BMW while also being successful in the United States, Porsche's main market at the time.
Ordered by Ferdinand Porsche to design a production-feasible concept for the new model, Fuhrmann initiated a design study in 1971, eventually yielding the 928 which was the first clean sheet design by the company for its own model; the 356 had evolved from the Volkswagen Beetle, the 911 was an evolution of the 356 and the 924 was the result of an abandoned project by Volkswagen and Audi.
Several drivetrain layouts were considered during early development, including rear and mid-engine designs, but most were dismissed because of technical and legislative difficulties. Having the engine, transmission, catalytic converter(s) and exhaust all cramped into a small rear engine bay made emission and noise control difficult which were the problems Porsche had with the 911. After deciding that the mid-engine layout did not allow enough room in the passenger compartment, a front-engine, rear-wheel drive layout was chosen. Porsche may have feared that the U.S. government would soon ban the sale of rear-engine cars in response to concern over safety problems with the rear-engine Chevrolet Corvair.
Porsche engineers wanted a large-displacement engine to power the 928, and prototype units were built with a 5-litre V8 engine rated at nearly 306 PS (225 kW; 302 hp). Ferdinand Piëch wanted this car to use a 4.6-litre 90 degree V10 engine with 88 mm bore spacing, a derivative of the Audi 5 cylinder engine, which in turn is based upon the Volkswagen EA827 unit. The Porsche board objected as this move would give rise to a rumour of a new 911 with a front-mounted six cylinder engine, but also it is theorized that the board wanted to maintain some distance from the Volkswagen group.
The resulting all-alloy M28 engine has multiple unusual features. Its bore spacing is 122 mm, and uses thick aluminium cylinder barrels, hence the lower displacement. The engine was designed for air flow first, thus the spark plugs are located at the top of the head. The four-bolt bearings are sizeable and are fed oil via grooves in the bottom surface of the block. The oil and water pumps are driven by the timing belt, and the design of the engine allows for sufficient air flow with a low bonnet.
The first two running prototypes of Porsche's M28 V8 used one four-barrel carburetor for initial testing. The cars were sold with the planned Bosch K-Jetronic fuel injection system. When increasing concern within the company over price and availability of fuel during the oil crisis of the 1970s became an issue of contention, smaller engines were considered in the interest of fuel economy. A push began for the development of a 3.3 L 182 PS (134 kW; 180 hp) powerplant envisioned by Fuhrmann, but company engineers balked at this suggestion. Both sides finally settled on a 4.5 L, SOHC per bank 16-valve V8 rated at 240 PS (180 kW; 240 hp) (219 hp (163 kW) in North America), which they considered to have an acceptable compromise of performance and fuel economy.
The finished car debuted at the 1977 Geneva Motor Show before going on sale later that year as a 1978 model. Although it won early acclaim for its comfort, power and futuristic design, sales were slow. Base prices were much higher than that of the previous range-topping 911 model and the 928's front-engined, water-cooled design alienated many Porsche purists.
Fuhrmann's replacement, Peter Schutz, decided that the models should be sold side by side, feeling that the 911 still had potential in the company's line-up. Legislation against rear-engined vehicles did not materialize. Although it never sold in the numbers Fuhrmann envisioned, the 928 developed an avid following and had an 18-year production run.
Design and specifications
The 928 featured a large, front-mounted and water-cooled V8 engine driving the rear wheels. Originally displacing 4.5 L and featuring a single overhead camshaft design, it was rated at 219 hp (163 kW; 222 PS) for the North American market and 240 PS (177 kW; 237 hp) in other markets. Porsche upgraded the engine from mechanical to electronic fuel injection in 1980 for US models, although power remained the same. This design marked a major change in direction for Porsche (started with the introduction of the 924 in 1976), whose cars had until then used only rear- or mid-mounted air-cooled flat engines with four or six cylinders.
Porsche utilised a transaxle in the 928 to help achieve 50/50 front/rear weight distribution, aiding the car's balance. Although it weighed more than the difficult-to-handle 911, its more neutral weight balance and higher power output gave it similar performance on the track. The 928 was regarded as the more relaxing car to drive at the time. It came with either a five-speed dog leg manual transmission, or a Mercedes-Benz-derived automatic transmission, originally with three speeds, with four-speed from 1983 in North America and 1984 in other markets. More than 80% of the cars had the automatic transmission. Exact percentage of manual gearbox cars for entire production run is not known but it is believed to be between 15 and 20%.
The body, styled by Wolfgang Möbius under guidance of Anatole Lapine, was mainly galvanized steel, but the doors, front wing, front fenders, and hood were made of aluminium in order to make the car more lightweight. It had a substantial luggage area accessed via a large hatchback. The new polyurethane elastic bumpers were integrated into the nose and tail and covered in body-coloured plastic; an unusual feature for the time that aided the car visually and reduced its drag. Another unusual feature were the pop-up headlamps which were based on the units found on the Lamborghini Miura and were integrated into the front wings.
The 928 qualified as a 2+2, having two small seats in the rear. Both rear seats could be folded down to enlarge the luggage area, and both the front and rear seats had sun visors for occupants. The rear seats are small (due to the prominent transmission hump) and have very little leg room; they are only suitable for adults on very short trips or children. The 928 was also the first vehicle in which the instrument cluster moved along with the adjustable steering wheel in order to maintain maximum instrument visibility.
The 928 included several other features such as the "Weissach Axle", a simple rear-wheel steering system that provides passive rear-wheel steering to increase stability while braking during a turn, and an unsleeved, silicon alloy engine block made of aluminium, which reduced weight and provided a highly durable cylinder bore.
Porsche's design and development efforts paid off during the 1978 European Car of the Year, where the 928 won ahead of the BMW 7 Series, and the Ford Granada. The 928 is the only sports car so far to have won this competition, where the usual winners are mainstream hatchbacks and sedans/saloons from major European manufacturers. This is regarded as proof of how advanced the 928 was, compared to its contemporaries.
Styling was the same in both 1978 and 1979, with the body lacking both front and rear spoilers. From 1980 (1983 in North America) through 1986, front and rear spoilers were present on "S" models, rear spoilers being integrated into the hatch. From 1987 through 1995, the front spoiler was integrated into the nose and the rear spoiler became a separated wing rather than an integrated piece, and side skirts were added. The rear tail-light configuration was also different from previous models. GTS models had wider rear fenders added to give more room for 9-inch wide wheels. Another easily noticeable visual difference between versions is the style of the wheels. Early 928s had 15-inch or 16-inch "phone dial"-style wheels, while most 1980s 928s had 16-inch slotted "flat disc" wheels, CSs, SEs and 1989 GTs had 16-inch "Club Sport" wheels, later GTs had 16-inch "Design 90" style wheels which were also option on same period S4s (shared with the 944 as well), the GTS used two variations of the 17-inch "CUP" wheels.
Porsche introduced a refreshed 928 S into the European market in 1980 model year, although it was summer of 1982 and MY 1983 before the model reached North America. Externally, the S wore new front and rear spoilers and sported wider wheels and tires than the older variant, but the main change for the 928 S was under the hood, where a revised 4.7 L engine was used. European versions debuted with 221 kW; 296 hp (300 PS), and were upgraded to 228 kW; 306 hp (310 PS) for the 1984 model year. From 1984 to 1986, the S model was called S2 in United Kingdom. These cars used Bosch LH-Jetronic fuel injection system and purely electronic Bosch ignition, the same systems used on the later 32-valve cars, though without the pollution controls. North American-spec 1983 and 1984 S models used among other differences, smaller valves, milder camshafts, smaller diameter intake manifolds, and additional pollution equipment in order to meet emissions regulations, and were limited to 174 kW; 237 PS (234 hp) as a result. Due to low grade fuel, the 16-valve low compression S engine was made for Australian market in the 1985 model year. It had a 9.3:1 compression ratio pistons as opposed to the normal 10.4:1 but used the same large intake, high lift cams, large valves etc. of other S engines.
As the faster European model was not available in the United States and Canada during the first three years of its existence, a "Competition Group" option was created to allow North American customers to have an S model lookalike with front and rear spoilers, 16-inch flat disc wheels, sport seats, sport springs and Bilstein Shock Absorbers. Customers could specify paint and interior colours the same way as on a normal 928. Two cars were made in the late 1980 model year for U.S. with this option. The package was officially available in 1981 and 1982 model years and was canceled in 1983 when the S model became available for these markets. Many cars have had S model features added by subsequent owners, making original "Competition Group" cars difficult to distinguish without checking option codes.
In the 1982 model year, two special models were available for different markets. 202 "Weissach Edition" cars were sold in North America. Unusual features were champagne gold metallic paint, matching brushed gold flat disc wheels, two-tone leather interior, a plaque containing the production number on the dash and the extremely collectible three-piece Porsche luggage set. It's believed these cars were not made with S spoilers even though these were available in U.S. during this time period as part of the "Competition Group" option. The "Weissach Edition" option was also available for the US market 911 for the 1980 model year and 924 for the 1981 model year.
141 special "50th Jubilee" 928 S models were available outside the U.S. and Canada to celebrate the company's 50-year existence as a car manufacturer. This model is also sometimes referred to as the "Ferry Porsche Edition" because his signature was embroidered into the front seats. It featured meteor metallic paint and was fitted with flat disc wheels, wine red leather and special striped fabric seat centers. Similar 911 and 924 specials were also made for world markets.
Porsche updated the North American 928 S for 1985, replacing the 4.7 L SOHC engine with a new 5.0 L DOHC unit sporting four valves per cylinder and producing 215 kW; 292 PS (288 hp). Seats were also updated to a new style, these cars are sometimes unofficially called S3 to distinguish them from 16-valve "S" models. European models kept a 4.7 L engine, which was somewhat more powerful as standard, though lower 9.3:1 compression 32-valve engine together with catalytic converters became an option in some European countries and Australia for 1986. In 1986, revised suspension settings, larger brakes with 4-piston callipers and modified exhaust system was available on the 928S, marking the final changes to old body style cars. These were straight from the 928S4, which was slated to debut a few months later. These changes came starting from VIN 1001, which means that the first thousand 1986 cars had the old brakes, but later cars had this equipment available. This later 1986 model is sometimes referred to as a 1986?1/2 or 1986.5 because of these changes. The name is a little misleading as more than 3/4 of the 1986 production had these updates.
The 928 S4 variant debuted in the second half of 1986 as a 1987 model, an updated version of the 5.0 L V8 for all markets producing 235 kW; 316 hp (320 PS), sporting a new single-disc clutch in manual transmission cars, larger torque converter in cars equipped with automatic transmission cars and fairly significant styling updates which gave the car a cleaner, sleeker look. S4 was much closer to being a truly world car than previous models as only major differences for North American models were instrumentation in either kilometers or miles, lighting, front and rear bumper shocks and the availability of catalytic converters in many other markets. The Australian market version was the only one with different horsepower rating at 221 kW; 296 hp (300 PS) due to preparation for possible low grade fuel. Even this was achieved without engine changes.
A Club Sport variant which was up to 100 kg (220 lb) lighter became available to continental Europe and U.S. in 1988. This model was the toned down version of the 1987 factory prototype which had a lightened body. Also in 1987, the factory made five white lightweight S4 models with a manual transmission for racecar drivers who were on their payroll at the time (Derek Bell, Jochen Mass, Hans Stuck, Bob Wollek and Jacky Ickx). These were close to same as later actual Club Sport models and can also be considered prototypes for it. An SE (sometimes called the S4 Sport due to model designation on rear bumper), a sort of halfway point between a normally equipped S4 and the more race-oriented Club Sport, became available for the UK market. It's generally believed that these cars have more power than the usual S4. They utilize parts which later became known as GT pistons, cams and engine ECU programs. Some of them had stronger, short ratio manual transmission. The automatic transmission was not available for this model.
For the 1989 model year, a visible change inside was digital trip computer in the dashboard. At the same time Australian models received the same 235 kW; 316 hp (320 PS) engine management setup as other markets. Porsche debuted the 928 GT in the late winter 1988/89 after dropping the slow-selling CS and SE. In terms of equipment, the GT was like the 928 SE, having more equipment than a Club Sport model but less than a 928 S4 to keep the weight down somewhat. It had the ZF 40% limited-slip differential as standard like the Club Sport and SE before it. Also, like the CS and SE, the GT was only available with a manual gearbox. European 1989 CS and GT wheels had an RDK tire pressure monitoring system as standard, which was also optional for the same year S4. For 1990 model year Porsche made RDK and a 0-100% variable ratio limited-slip called PSD (Porsche Sperr Differential) standard in both GT and S4 models for all markets. This system is much like the one from the flagship 959 and gives the vehicle even more grip on the track. In 1990, the S4 was no longer available with a manual transmission.
The S4 and GT variants halted production at the end of the 1991 model year, making way for the final version of the 928. The 928 GTS was available for sale in late 1991 as a 1992 model in Europe and in spring of 1992 as an early 1993 model in North America. Changed bodywork, larger front brakes and a new, more powerful 5.4 L, 350 PS (257 kW/345 hp) engine were the big advertised changes; what Porsche wasn't advertising was the price. Loaded GTS models could eclipse US$100,000 in 1995, making them among the most expensive cars on the road at the time. This severely hampered sales despite the model's high competency and long standard equipment list. Porsche discontinued the GTS model that year after shipping only 77 of them to the United States. Total worldwide production for all years was a little over 61,000 cars.
Second-hand models' value decreased as a result of high maintenance costs due to spare parts that are expensive to manufacture. Many parts suppliers and enthusiast networks exist, especially in the United States, Germany and the UK.
Road & Track magazine published a speculative piece in their April 2006 issue regarding the possibility of a new, 928-esque coupé that may debut on a shortened version of the Panamera's platform sometime around 2011 or 2012 model year but this speculation remained uncredible as Porsche denied the possibility of any such model reaching production stage.
The evolution of the 928 during its 18 years of production was quite subtle. The tables below show the major differences, which were made to the nose, tail, interior, engine, and wheels.
Worldwide production numbers
All production numbers are approximate figures collected from several sources. Porsche hasn't published actual numbers.
1) Count contains 2 1980, 458 1981 and 1,084 1982 US "Competition Group" models made.
The Porsche 942 was a special edition 928 presented by the company as a gift to Ferry Porsche on his 75th birthday in 1984. It's also known as the 928-4. It featured a 25 cm (10 in) longer wheelbase than the normal 928 production model, including an extended roof above the rear seats to better accommodate tall passengers, and what were at the time very advanced projector headlights. The weight increased marginally, by 75 kg (165 lb). It also received the new front and rear bumpers two years before they entered production on the S4 and the 5.0-litre 32-valve engine before it was introduced in the US market. This early model of the engine was slightly less powerful, producing 310 PS (228 kW) and 420 N·m (310 lb·ft) of torque at 2700 rpm.
"Study H50" Four-door 928 based prototype
Three years later, in 1987, the lengthened 928 that had been presented to the company's founder on his 75th birthday turned up as a "Feasibility Study", now with a second (rather narrow) set of doors, apparently opening in the same way as the suicide doors seen on the later Mazda RX-8. At the time "Study H50" appeared to sink with little trace, but two decades later, with the launch of the larger four-door Porsche Panamera saloon, the 928 based four-door saloon prototype from 1987 acquired greater significance.
928 long wheelbase specials
In 1986 Porsche together with tuning company AMG made a few long wheelbase 928 specials. Unlike the 942, these had normal 928 headlights. One was presented to American Sunroof Corporation (ASC) founder and CEO Heinz Prechter. ASC was later partly responsible for manufacturing Porsche 944 S2 cabriolets.
The Max Moritz 'Semi Works' 928 GTR
Porsche's Racing Department never officially entered or prepared a racing 928 for a pure works entry. Only once Porsche decided to make it obvious to the 911 enthusiasts that they usually tended to underrate the racing genes of the 928. Porsche then "arranged" this 928GTR to compete against the then dominant 911 (993GTR) on the race track. In order not to offend sensibilities of their traditional 911 customers by openly challenging them with a Works 928GTR offering, Porsche asked Max Moritz Racing, their longtime private racing partner from next door Reutlingen to enter a 928GTR Cup as a 'semi-works' car.
The drivers were: Bernd Mayländer, Manuel Reuter (Porsche works pilots), also Harm Lagaay (then Head of Porsche's Design Studio). Vittorio Strosek sponsored MM with his Lightweight-Body-Parts and racing exhaust. The car was officially entered by Porsche-Club-Schwaben. Homologation minimum weight had to be, and actually is 1,370 kg (3,020 lb).
Lagaay reports that the car was very competitive and able to hold most 964 Cup GTs down, although the engine was no more than fine-tuned after having been chosen from a set of high power output specimen in Weissach. In the last race of the season at Hockenheim a crank-bearing ran dry. As the car was supposed to race in 1995 as well, it was made ready to continue its successful competition in the 1995 season. A fresh engine was installed, selected from the same lot of high output engines and tuned as before. In 1995 Porsche's 928 production came to an end, and the car consequently was not raced in the new season.
The late Max Moritz himself then added the car to his collection of historic vehicles. It was not put on the road again until after his death, when the family sold the car in October 2004 - with 24,500 km on the odometer.
For the 1984 24 hours of Daytona, Porsche sent one of its experimental "All-aluminium" 928S to the Brumos Racing Team to be prepared with specific instruction not to modify the car in any way. Porsche wanted to promote the performance of the 928 to North America. The drivers Richard Attwood (GB), Vic Elford (GB), Howard Meister (USA) and Bob Hagestad (USA) were told to just "drive the car". During practice for the 24-hour race the drivers found the car to be somewhat unstable on the high banks of Daytona and wanted to add a rear wing to the car; Porsche denied the request. The Brumos team tinkered with the suspension set up to make the car more stable. The car finished in 15th overall and 4th in the GTO class. One driver stated in an interview later on, that were it not for a lengthy pit stop to fix some body damage, they would have finished in the top 5 overall. The car was then returned to Porsche and is now in the Porsche Museum.
A 928S from Raymond Boutinaud also competed at the 24 Hours of Le Mans in 1983 & 1984 with a 22nd-place finish in 1984. The same car also competed in 1000k races at Spa, Brands Hatch and Silverstone in 1984, but with little success. It has been rumored that the Raymond Boutinaud 928S was also an "all-aluminium" car from Porsche but that has been unfounded.
On August 7, 1986 American racing driver Al Holbert set a speed record at Bonneville in a pre-production 928 S4. This 928 would turn 171.110 mph in the flying mile and 171.926 mph for the flying kilometer. In March 1986, the same car reportedly did 180+ mph at Nardo, but the Bonneville run netted United States Auto Club official record "at the time" for International Category A, Group 2, Class 9, for normally aspirated vehicles. That made 1987's 928 S4 the fastest non-turbocharged production car in the world.
On September 15, 2011 at the Bonneville Salt Flats, racing driver and owner of 928 Motorsports, LLC. Carl Fausett set the current world record as the fastest Porsche 928 in recorded history. The record setting run was clocked by the Utah Salt Flats Racing Association at 216.63537 mph. The car was a 900 BHP supercharged 6.54 liter 32 valve 928 specially built for the land speed record attempt. dubbed by 928 Motorsports as the "Rekordwagen", which raced in the class Blown Gas Modified Sports B/BGMS.
The Pikes Peak International Hill Climb is the second oldest auto race in the U.S.; a 12.42 mile (19.99 km) course with 156 turns starting at 9390 ft and ending at the 14110 foot summit of Pikes Peak. In 2007, 2008 and 2009 American racing driver Carl Fausett took his specially prepared and supercharged 1978 Porsche 928 to the Pikes Peak International Hill Climb and competed in the Open Division. Fausett placed third in the Open Division in both 2007 and again in 2009, where he was also the fastest 2WD car. At that time, much of the race course was gravel. Today the entire Pikes Peak Highway has been paved.
The photo Porsche-928-6A739D7FE403F6D00FD0B9840F40746F0951CD3E.jpg (Porsche 928 - Porsche 928 - 40 Jahre Porsche 928 | DREAM-CARS.CH
Source: https://www.dreamcar.ch/...) was uploaded by: email@example.com.